Acer Predator Helios 300 Not Booting

Last Updated on November 30, 2022 by Tech Questions

Acer Predator Helios 300 is a gaming laptop that was released in 2018. It has a 15.6-inch display and is powered by an Intel Core i7 processor. The Predator Helios 300 also has 16GB of RAM and 256GB of storage.

It runs on Windows 10 Home Edition. However, some users have reported that their Acer Predator Helios 300 laptops are not booting up properly. There can be several reasons for this problem, such as a corrupted BIOS or an incompatible operating system.

In this article, we will discuss the various reasons why your Acer Predator Helios 300 might not be booting up properly, and how you can fix it.

If your Acer Predator Helios 300 isn’t booting, there are a few possible explanations. The most likely cause is that the BIOS settings have been reset, which can happen if the computer loses power unexpectedly. To check if this is the case, enter the BIOS setup utility and look for the “Load Defaults” or “Reset BIOS” option.

If you find it, select it and then save your changes before exiting. Another possibility is that the hard drive has become corrupted or damaged. This can happen if the computer is shut down improperly or if a virus has infected it.

To check for this, try booting from a live CD or USB drive. If you’re able to do so, then you can copy over any important files before performing a clean install of the operating system. If neither of these solutions works, then it’s possible that there’s a hardware issue causing the problem.

Try reseating all of the cables inside the case and making sure that everything is properly plugged in. If that doesn’t help, then you may need to take the computer to a repair shop to have it diagnosed further.

[SOLVED!] Acer Predator Helios 300 PH312-52 wont Boot!

How Do I Fix My Acer Predator Helios 300 Black Screen?

If you’re experiencing a black screen on your Acer Predator Helios 300, there are a few potential causes. First, make sure that the computer is turned on and plugged in. If the power light is off or flashing, try pressing the power button to see if the computer will turn on.

If the computer turns on but the screen remains black, try pressing the Fn+F5 key combination to toggle between different display output options. This may cause the display to appear on an external monitor or other display device if one is connected. If neither of these solutions works, it’s possible that there is a problem with the LCD panel itself or with the video cable connecting it to the motherboard.

In either case, you’ll need to contact Acer customer support for further assistance.

How Do You Open the Boot Menu on an Acer Predator Helios 300?

Assuming you would like a step by step guide on how to open the boot menu on an Acer Predator Helios 300:

1. To begin, power off your computer.

2. Once it is powered off, press and hold the “F2” key on your keyboard.

3. Doing so will cause your computer to enter into BIOS mode; from here, you can navigate the various menus using the arrow keys on your keyboard.

4. Locate the “Boot” menu and select it using the Enter key.

5. Within the Boot menu, there will be a list of different boot options; use the arrow keys to highlight the one you wish to use and select it with Enter.

6. Finally, press F10 to save your changes and exit BIOS; your computer will now boot according to the option you selected!

How Do I Force Restart My Acer Predator Helios 300?

If your Acer Predator Helios 300 is unresponsive or frozen, you may need to force restart it. To do so, press and hold the power button for about 10 seconds until the system powers off. If the system is still unresponsive, you can remove the battery (if possible) and then press and hold the power button for 30 seconds to drain any residual power from the system.

Once the system is powered off, you can reinsert the battery (if applicable) and press the power button to boot up your device.

Acer Predator Helios 300 Stuck on Loading Screen

If you’re one of the many Predator Helios 300 owners who have been stuck on the loading screen, don’t worry – you’re not alone. Thankfully, there are a few things you can try to get your laptop up and running again. First, try restarting your computer.

If that doesn’t work, try holding down the power button for a full minute to see if that forces a reboot. If neither of those solutions work, you may need to take some more drastic measures. One thing you can try is opening up your computer and removing the battery.

Leave it out for a few minutes before putting it back in and trying to boot up again. This has worked for some people, although it’s obviously not ideal. If all else fails, you may need to reach out to Acer’s customer support for help.

They may be able to tell you what’s going on and how to fix it, or they may be able to send you a replacement laptop if yours is truly busted beyond repair.

Acer Predator Helios 300 Not Turning on Or Charging

If your Acer Predator Helios 300 is not turning on or charging, there are a few things you can try to fix the problem. First, check to make sure that the laptop is plugged in and that the power cord is securely connected. If it is, then try pressing and holding the power button for a few seconds to see if the laptop will turn on.

If not, then try plugging the laptop into a different outlet or using a different power cord. If your laptop still won’t turn on or charge, then the next step is to remove the battery and try powering on the laptop without it. If this works, then you know that the issue is with the battery and it needs to be replaced.

However, if removing the battery doesn’t help, then there could be an issue with the motherboard or another internal component of the laptop. In this case, you’ll need to take it to a repair shop to have them diagnose and fix the problem.

Boot Acer Predator Helios 300 from USB

If you want to install a new operating system on your Acer Predator Helios 300, you’ll need to boot from a USB drive. This process is relatively simple, but there are a few things you’ll need to do first. First, make sure that the USB drive you’re using is formatted correctly.

Next, disable Secure Boot in the BIOS settings. Finally, enable Boot Priority for your USB drive. Once all of these steps have been completed, you should be able to boot from your USB drive and install the new operating system.

Conclusion

If your Acer Predator Helios 300 isn’t booting, there are a few things you can try to fix the problem. First, make sure that the computer is plugged in and that the power cord is firmly connected. Next, check to see if the battery is charged.

If it’s not, try plugging the computer into an outlet to charge it. If the computer still won’t turn on, try holding down the power button for 30 seconds to reset it. If none of these solutions work, you may need to take your computer to a repair shop.