Skip to content

Can I Replace a 1.5V RAM With 1.35V RAM?

Last Updated on November 20, 2022 by Tech Questions

It’s a common question: can I replace my 1.5V RAM with 1.35V RAM? The answer is yes, but there are a few things to keep in mind before you make the switch. First, not all 1.5V RAM is compatible with 1.35V motherboards- so check your motherboard’s compatibility list first.

Second, while 1.35V RAM uses less power than 1.5V RAM, it also runs at a lower voltage and may not be as stable under heavy load (such as gaming or video editing). If you’re looking to save on power without sacrificing performance, consider switching to low-voltage DDR3L instead of DDR3.

  • Purchase a 1.35V RAM that is compatible with your computer
  • Turn off your computer and unplug all cable
  • Remove the existing RAM from your computer
  • Insert the new RAM into the empty slot/s on your motherboard
  • If you have a desktop computer, reattach any cables that were connected to the old RAM and then turn on your computer.
  • If you have a laptop, close up the case and then turn on your computer

1.35 V RAM in a 1.5 V system – Will it fry or overclock? (2 Solutions!!)

Can I Use 1.35 V Instead of 1.5 V RAM?

No, you cannot use 1.35V instead of 1.5V RAM. Your computer’s motherboard will not support 1.35V RAM and it will not work with your other components. Additionally, using 1.35V RAM would void any warranties you have on your existing RAM modules.

Can I Run RAM at 1.35 V?

Yes, you can run RAM at 1.35 V as long as your motherboard and CPU support it. Most newer motherboards and CPUs will support 1.35 V RAM, but it’s always best to check your specific model numbers to be sure. Additionally, running RAM at 1.35 V can potentially increase its lifespan since lower voltages put less stress on the components.

Can I Use DDR3 And DDR3L Together?

DDR3 and DDR3L are two different types of memory modules. They are not compatible with each other and cannot be used together.

Can You Mix Different Voltage RAM?

Different types of RAM have different voltages, so you can’t mix them. The voltage is determined by the type of RAM, and mixing different types will lead to problems. For example, DDR3 RAM typically has a voltage of 1.5V, while DDR4 RAM has a voltage of 1.2V.

If you try to mix these two types of RAM, the computer won’t be able to use both properly and could even damage the components.

Can I Replace a 1.5V Ram With 1.35V Ram?

1.5V Ram in 1.35V Slot

Do you have 1.5V RAM and a 1.35V slot? Don’t worry, you can still use your 1.5V RAM in a 1.35V slot! Here’s how:

First, check to see if your motherboard supports 1.5V RAM in a 1.35V slot. If it does, then you’re all set! Just insert your 1.5V RAM into the appropriate slot and away you go.

If your motherboard doesn’t support 1.5V RAM in a 1.35V slot, don’t fret – there’s still a way to make it work.

1.35V Ram in 1.2V Slot

1.35V Ram in 1.2V Slot Is it possible to use 1.35V ram in a 1.2V slot? The answer is yes, but there are some things to keep in mind before doing so.

First of all, using 1.35V ram in a 1.2V slot will result in lower performance than if the ram was being used in a 1.35V compatible slot. This is because the lower voltage can cause the ram to run at a lower frequency, which in turn will lead to reduced performance. Additionally, using 1.35V ram in a 1.2V slot may also void your warranty as most manufacturers only guarantee compatibility with the voltages specified for each type of memory module.

That said, if you’re looking to save money or simply don’t have any other option, using 1. 35v RAM modules n a 1.
2v slot is perfectly fine and will not damage your computer . Just be aware of the potential downsides before making your purchase.

1.5 V Memory Modules are Not Supported.

If you’re using a 1.5 V memory module in your computer, you may be out of luck. That’s because 1.5 V modules are not supported by most computers. In fact, they may not even work in some computers.

So what does this mean for you? If you’re using a 1.5 V module, it’s important to check with your computer manufacturer to see if it’s compatible. You may also want to consider upgrading to a 2.0 V module, which is more widely supported.

Either way, it’s important to be aware of this issue so that you can make the best decision for your needs.


If you’re wondering whether you can replace a 1.5V RAM with 1.35V RAM, the answer is yes, you can. However, there are a few things to keep in mind before doing so. First, 1.5V RAM is faster than 1.35V RAM, so if you’re looking for a speed boost, you won’t get it by switching to 1.35V RAM.

Second, 1.5V RAM uses more power than 1.35V RAM, so your battery life will suffer if you switch to the lower-voltage option. Finally, some motherboards may not be compatible with 1.35V RAM, so be sure to check your motherboard’s specifications before making the switch.