Skip to content

How to Acer A515 51G Ram Upgrade?

Last Updated on November 6, 2022 by Tech Questions

One of the most common Acer Aspire A515-51G upgrades is adding more RAM. More RAM can help your computer run faster and smoother, especially if you have a lot of programs open at once or are working with large files. If your Acer Aspire A515-51G is running slowly or bogging down when you have multiple programs open, it might be time for a RAM upgrade.

Here’s how to do it;

  • Shutdown your computer and disconnect the power cord.
  • Remove the bottom panel of your computer’s case to access the RAM modules.
  • Look for two empty slots next to each other, which will be used for the new RAM modules.
  • Insert the new RAM modules into the empty slots and press down until it clicks into place.
  • If you have a second pair of identical RAM modules, insert them into the other two available slots for even better performance (optional).
  • If you only have one pair of new RAM modules, leave the remaining empty slot(s) empty for best stability (optional).
  • Replace the bottom panel on your computer’s case and screw it back in place (optional).
  • Reconnect your computer to its power source and turn it on.

Acer Aspire A515-51 RAM & SSD Upgrade

Is Acer Aspire 5 A515 Ram Upgradable?

Acer Aspire 5 A515 RAM upgradable Yes, the Acer Aspire 5 A515 is RAM upgradable. The laptop comes with 4 GB of DDR4 SDRAM, but it can be upgraded to 8 or 16 GB.

To do this, you will need to remove the back cover and locate the RAM slots. Once you’ve found them, simply insert the new RAM modules into the slots and replace the cover. Keep in mind that you’ll void your warranty if you upgrade your RAM yourself, so it’s best to leave it to a professional if possible.

What is the Max Ram for Acer Aspire 5?

The Acer Aspire 5 can accommodate up to 32GB of RAM. This is achieved by using two 16GB SO-DIMM modules.

Does the Acer Aspire 5 Have 2 Ram Slots?

Yes, the Acer Aspire 5 has two RAM slots.

Can You Upgrade the Ram on a Acer Aspire 5 A515 46 R14K?

If you have an Acer Aspire 5 with the model number A515-46-R14K, then you should be able to upgrade the RAM. The maximum amount of RAM that your computer can hold is 32 GB. To upgrade the RAM, you will need to purchase two 16 GB DDR4 SO-DIMM modules.

These can be found online or at a local electronics store. Once you have the new RAM modules, simply follow the instructions in your computer’s manual on how to replace the old ones.

How to Acer A515 51G Ram Upgrade?

Acer Aspire A515-51G Ram

Acer Aspire A515-51G Ram is a powerful and reliable computer memory that allows for quick access to data and programs. This type of ram is also known as DDR4, which is the latest standard for computer memory. Acer Aspire A515-51G Ram is available in different capacities including 4GB, 8GB, and 16GB.

It comes with a speed of 2133MHz, which is faster than the previous generation of ram (DDR3).

Acer Aspire A515-51 Ram Upgrade

Acer Aspire A515-51 Ram Upgrade If you have an Acer Aspire A515-51 and want to upgrade the RAM, there are a few things you need to know. First, the maximum amount of RAM that your computer can support is 32GB.

That said, it is important to note that not all motherboards will be able to accommodate that much memory. It is also worth mentioning that if you do upgrade to 32GB of RAM, you will likely never need to worry about upgrading again (at least in terms of capacity). With that being said, let’s take a look at how to go about upgrading the RAM in your Acer Aspire A515-51.

The first thing you need to do is purchase the appropriate type of RAM for your computer. For the Acer Aspire A515-51, you will need DDR4 2400MHz SO-DIMM memory modules. Once you have the new memory modules, power down your computer and unplug it from any power source.

Next, remove the bottom panel so that you can access the internals of the machine. Locate the two existing SO-DIMM slots and remove them by gently pushing down on the latches on either side (you may need a small flathead screwdriver to help with this). Now it’s time to install the new memory modules.

Line up each module with its respective slot and then gently push down until it clicks into place. You should now see that both modules are firmly seated in their slots (if not, gently remove and reinsert them until they are properly locked in). Finally, put everything back together and plug your computer back in – once it powers up, check BIOS/UEFI settings to ensure that 32GB of total RAM is now being detected.

If everything looks good, congrats! You’ve successfully upgraded your Acer Aspire A515-51’s RAM!

Acer Aspire A515-51 SSD Upgrade

If your Acer Aspire A515-51 is running slow, you may be considering a solid state drive (SSD) upgrade. SSDs can provide a significant performance boost over traditional hard drives, and they’re more reliable and durable as well. Here’s everything you need to know about upgrading your Acer Aspire A515-51 to an SSD.

Before You Begin There are a few things you’ll need before starting this upgrade: A Phillips head screwdriver,
An external hard drive or USB flash drive (for backing up your data) Assuming you have all of the above, the first thing you’ll want to do is back up your data. Even if you’re just doing a fresh Windows install, it’s always good to have backups.

Once that’s done, shut down your computer and unplug all cables except for the power cord. Flip it over and remove the following screws: four screws securing the service cover two screws securing the battery bracket one screw securing the Wi-Fi module. With those screws out, gently lift off the service cover and set it aside. Next, disconnect the battery by pulling on the black tab at its connector. With that done, unscrew and remove the metal bracket holding down the SSD (it will be labeled).

Now carefully pull out the old SSD; if it feels stuck, wiggle it a bit until it comes free. Take note of how it was oriented in its slot so that you can insert the new SSD in correctly.


If your Acer Aspire A515-51G is running slow, you may need to upgrade the RAM. Here’s how to do it:

1. Shut down your computer and unplug all cords and peripherals.

2. Remove the bottom panel of your computer case by unscrewing the screws that hold it in place.

3. Locate the RAM slots on the motherboard and remove the old RAM modules by gently pushing on the clips that hold them in place.

4. Insert the new RAM modules into the empty slots, making sure that they are properly seated and locked in place.

5. Replace the bottom panel of your computer case and screw it back into place.