Skip to content

What Is a Meter Loop?

What Is a Meter Loop

Last Updated on November 2, 2022 by Tech Questions

A meter loop is a device that is used to measure the amount of electricity that is flowing through a particular circuit. This device is placed in between the electrical panel and the meter. The purpose of the meter loop is to allow for accurate measurements of electricity usage.

A meter loop is a term used to describe the portion of an electrical service that extends from the point where service enters a property to the main breaker or fuse panel. This includes the electric meter, any required disconnects, and the associated wiring.

Meter Loop Installation

What is a Temporary Meter Loop?

If you need to have electrical service installed at a new location, you may be wondering what a temporary meter loop is. This type of installation is typically used when construction is not yet complete on the building or if the final location of the meter has not yet been determined. The first step in any new electrical installation is to contact your local utility company and request a quote for service.

Once you have received a quote and decided to proceed with service, the next step is to schedule an appointment for a technician to come out and survey the property. During the survey, the technician will take note of any existing power lines and other obstacles that could prevent them from running a new line to your desired location. They will also determine where the best location for the new meter would be.

Once all this information has been gathered, they will provide you with a proposal for installing your temporary meter loop. Proposals typically include two options: above ground or below ground installation. Above ground installations are less expensive but require more space as the equipment must be mounted on poles or buildings.

Below ground installations are more expensive but offer a cleaner look as all of the equipment can be buried underground. Once you have decided on an option and signed off on the proposal, work will begin on installing your temporary meter loop. The process typically takes 1-2 days depending on complexity and weather conditions.

After everything has been installed, tested, and approved by your utility company, they will send out someone to install your actual electric meter which will allow you to start using electricity at your new location!

What is a Gas Meter Loop?

A gas meter loop is a type of gas meter that uses a device called a diaphragm to measure the amount of natural gas flowing through it. The diaphragm is connected to a series of gears that rotate as the diaphragm moves, allowing the meter to accurately measure the amount of gas flow. Gas meter loops are used in both residential and commercial applications and are considered to be one of the most accurate methods for measuring natural gas flow.

What Size Wire is Used on a Meter Loop?

There is no definitive answer to this question as the size of wire used on a meter loop can vary depending on a number of factors, such as the voltage and current rating of the circuit, the length of the run, and the environmental conditions. However, in general, a good rule of thumb is to use a wire size that is one step up from what is required by the circuit. For example, if the circuit calls for 12-gauge wire, you would use 10-gauge wire on the meter loop.

This will help to ensure that the circuit has plenty of capacity and will not be overloaded.

What is a Meter Rack?

A meter rack is a type of electrical equipment that is used to store and organize electrical meters. It is typically made of metal or plastic and has a variety of different compartments, shelves, and slots for holding the various types of meters. Meter racks can be wall-mounted or free-standing, and they come in a variety of sizes to accommodate different numbers of meters.

What Is a Meter Loop?

Meter Loop Cost

If you’re a homeowner, the cost of your meter loop is probably not something you think about on a regular basis. But when it comes time to pay your electric bill, the cost of your meter loop is one of the factors that’s used to calculate the total amount you owe. How Much Does a Meter Loop Cost?

The cost of a meter loop varies depending on several factors, including the size and type of building being served, the distance from the nearest power line, and whether or not there are any existing structures that need to be removed in order to make room for the new loop. In most cases, commercial customers can expect to pay between $500 and $5,000 for their meter loops, while residential customers will typically pay between $200 and $2,000. However, it’s important to keep in mind that these prices are only estimates – actual costs may vary depending on specific circumstances.

Meter Loop for Sale

If you’re in the market for a meter loop, there are a few things you should know. A meter loop is typically used to provide power to a single-family home or small business. It consists of a metal frame that supports an electrical meter and circuit breakers or fuses.

The frame is mounted on a pole or wall, and the whole assembly is typically enclosed in a weatherproof housing. There are two main types of meter loops: underground and overhead. Underground loops are more expensive but offer several advantages over their overhead counterparts.

They’re less likely to be damaged by severe weather, for one thing. And because they’re buried, they’re also less visible and thus can be more aesthetically pleasing. Overhead loops have some advantages of their own, however.

They’re less expensive than underground models, and they’re easier to install (especially if you DIY). If you live in an area with high winds, though, an overhead loop may not be the best choice since it’s more susceptible to damage from fallen tree limbs and the like. So which type of meter loop is right for you?

Ultimately, it comes down to personal preference and budget. But whichever way you go, make sure you buy from a reputable dealer—a bad loop can cause all sorts of problems down the road!

Meter Loop 200 Amp

If you’re a homeowner, there’s a good chance that you have a 200-amp meter loop. This is the standard size for most homes and it’s what your utility company will install if you’re building a new home. A 200-amp meter loop can handle up to 200 amps of electricity.

That means it can provide power for up to 20,000 watts of appliances and devices. Most homes don’t come close to using that much power, but it’s good to know that your meter loop can handle it if you ever need to upgrade your electrical service. Meter loops are made of copper or aluminum and they’re underground.

They connect your home’s electrical system to the main power lines that run through your neighborhood. Your utility company owns and maintains the meter loop, so you don’t have to worry about it unless there’s a problem with your electricity service. If you ever need to have work done on your electrical system, be sure to hire a licensed electrician who is familiar with working on meter loops.

They’ll know how to safely disconnect your home from the power grid and reconnect it when the work is finished.


A meter loop is an electrical circuit that connects a utility meter to the main service panel. The term “meter loop” is most often used in reference to residential applications, where the utility company owns and maintains the meter. In commercial and industrial settings, the customer may own and maintain their own meters.

Meter loops can be either direct-buried or installed above ground on a pole.